NEWS

syringe filters Providing high quality filtration solutions

Choose from a variety of syringe filter sizes, membranes and housings for a wide range of laboratory applications.

High quality filtration

Low extractable membranes and solvent-resistant housing

Titan3 color coded ring

For easy selection of correct membrane and pore size

High burst pressures

For enhanced robustness in sample processing

Titan3 syringe filters

Titan3 nylon syringe filters

DiameterPore sizePre-filterQuantityPart numberApplications

4

 

0.2/0.45No100

42204-NN

44504-NN

HPLC and organic solvent sample preparation and clean up
• Dissolution sample analysis • General sample preparation prior to analytical analysis
• Mixed sample matrix of aqueous or organic dissolved analytes

 

17

0.2/0.45

0.2

Yes200

42213-NN

44513-NN

42225-NN

44525-NN

 

30

0.45/15/5No100

44526-NN

41225-NN

45025-NN

Titan3 PTFE (hydrophobic) syringe filters

40.2/0.45No100

42204-NP

44504-NP

Filtration of aggressive organic, highly basic or hot solutions, transducer protectors • Fiter aqueous solutions after prowetting with an alcohol Note: PTFE hydrophobic membranes require pre-treatment with alcohol before being suitable for aqueous or high aqueous/organic samples. Do not use directly with aqueous
solutions.

17

0.2/0.45No200

42213-NP

44513-NP

 

30

0.2/0.45

1.0

Yes/No100

42225-NP

44525-NP

41025-NP

     

Titan3 PTFE (hydrophobic) syringe filters

170.2/0.45No200

42213-NPL

44513-NPL

Filtration of aggressive organic,
highly basic or hot solutions, without the need pre-wet membrane
Filter aqueous solutions without
prewetting with an alcohol.
300.2No100

42225-NPL

 

Titan3 PTFE (hydrophobic) syringe filters

40.2/0.45No100

42204-PV

44504-PV

General biological filtration
Filtration of samples where high protein recovery is desired.
170.2/0.45Yes/No200

42213-PV

44513-PV

 
300.2/0.45Yes/No1000

42225-PV

44525-PV

 

Thermo ScientificTM Titan3TM syringe filters

Comments
High performance HPLC syringe filters
• Low extractable membranes and housing
• HPLC performance tested
• Color coding for easy selection of the correct membrane and pore size
• Enhanced Luer Lock inlet which prevents leakage
• Most 30 mm devices are provided with a 1mm boro-silicate glass pre-filter. This is of benefit for high solids samples with larger size particulates
• Integral ring provides greater strength to the housing preventing leakage and bursting
• 30 mm products pressure rated to 120 psi
• Packed in reusable rigid transparent color coded containers
Learn more at thermofisher.com/automatedspe

Request a Quote